NMSU’s PSL conducts unmanned aircraft systems detect and avoid tests for FAA

DATE: 07/30/2019
WRITER: Tiffany Acosta, 575-646-3929, tfrank@nmsu.edu
CONTACT: Henry Cathey, 575-646-9474, hcathey@psl.nmsu.edu

A drone lands during a break in testing of software that would detect manned air craft and making the drone divert course before endangering the manned aircraft. Wednesday July 17, 2019. (NMSU photo by Josh Bachman)

With increased popularity and usage of unmanned aerial systems, commonly referred to as drones, keeping the skies safe is critical. New Mexico State University is part of a team conducting testing to help the Federal Aviation Administration achieve that goal.

As one of the seven FAA-approved Unmanned Aircraft Systems Test Sites, NMSU’s Physical Science Laboratory hosted three days of flight testing, July 16-18, for an FAA project, “Task A18: Small UAS Detect and Avoid Requirements Necessary for Limited Beyond Visual Line of Sight Operations: Separation Requirements and Testing” at the Jornada Experimental Range, north of Las Cruces.

“All of this testing is about safety,” said Henry Cathey, NMSU PSL research and development engineering manager. “Flight safety is number one. We want to make sure that folks, who are in aircraft, can fly safety with UAS or drones in the air.”

The flight testing involved various flying encounter scenarios between UAS and manned aircraft to determine if the UAS could detect the aircraft and respond with a maneuver to avoid it. An AI-based autonomous collision avoidance system from Iris Automation called Casia was used on the UAS to help it see the world as a pilot does.

Two types of UAS, a multi-rotor and a fixed wing, with the Iris system onboard, and two manned, NMSU vehicles, the CTLS Light Sport aircraft and Spyder Ultralight aircraft, which posed as the intruder aircraft, were used in the flight testing.

Flying at two different altitudes for safety a drone diverts its course after detecting a manned aircraft, during tests at the Jornada Range Research site. July 17, 2019. (NMSU photo by Josh Bachman)

Considerations for encounter scenarios included safe separation distances between vehicles of at least 100 feet in lateral separation and 250 feet in vertical separation. The vehicles conducted tests at different encounter angles and cross patterns. Flights were conducted at two altitudes: 100 feet for the UAS and 500 feet for the manned along with 400 feet for the UAS and 650 feet for the manned. The testing assessed when the Iris system was triggered and its limits.

Cathey said the next step includes collecting the data and post processing the information, which will take weeks. Flight information on both the UAS and manned vehicles was collected, and the research team will plot together the information to show the encounters.

“At that point we will be able to help map this particular system to give the FAA an idea of what this technology is capable of,” he said.

“We have several more flight test events before we actually come up with a comprehensive plan, but we are using each flight test event to further expand the data we need to collect and how the operations need to run,” said Bill Oehlschlager, FAA UAS technical project lead. “We are using each incremental step to collect more data and make it safer for when we actually do this testing.”

Iris Automation CEO and co-founder Alexander Harmsen, who attended the flight testing, said he was pleased how his system responded.

Joe Millette, with NMSU and Cheryl Contreras, Deputy Head of Flight Operations with IRIS watching over flight operation during testing of new software allowing drones to devert their course when appoching a manned aircraft to avoid collisions, Wednesday July 17, 2019 at the Jornada Range Facility. (NMSU photo by Josh Bachman)

“The system is doing everything we expect it to do,” he said. “We’re having these encounters. The system, it detects the aircraft, it tracks it and classifies it. It is able to tell the difference between a drone, a helicopter, a small, fixed-wing aircraft and a cloud or a bird.”

As one of 15 core universities for the FAA UAS Center of Excellence, NMSU is also working with the University of North Dakota, University of Alaska Fairbanks, Kansas State University and Mississippi State University on the research project. NMSU, UND and UAF are each hosting flight testing on detect and avoid solutions.

Officials present for the testing included NMSU personnel, FAA sponsors, FAA technical leads, FAA interns, Iris Automation flight personnel, industry representatives, UND and UAF personnel.

Testing on other technology solutions such as ground-based, visual/optical systems, radar and acoustic is also planned, and NMSU is slated to host additional flight testing.

“We are trying to help push those technology solutions forward. There are going to be lots and lots more vehicles in the air in the coming years and we want it to be done safely,” Cathey said.